Race Team News

2023 WORCS round 6 — Cedar City

By Precision Concepts | May 29, 2023 |

2023 Cedar City WORCS Report —  The sixth round of the WORCS series took place at Three Peaks Oasis outside Cedar City, UT. Most of the course serpentined its way through the surrounding trees and bushes. In addition, there were a few infield lanes with motocross jumps. And the WORCS crew incorporated an endurocross-inspired section,…

Read More

2023 NGPC round 7 — Delta, UT

By Precision Concepts | May 22, 2023 |

2023 Delta NGPC Report —  The seventh round of the NGPC series, the last NGPC before heading into the Summer break, took place this weekend in Delta, Utah. The hosting Bunkerhill MX track anchored a sandy, whooped-out course, which was on the shorter side, as far as lap times, compared to other circuits. Laps took…

Read More

2023 WORCS round 5 — Glen Helen, CA

By Precision Concepts | May 8, 2023 |

2023 Glen Helen WORCS Report —  The ever-present location of Glen Helen hosted the fifth round of the 2023 WORS series. Mid-week showers, cloud cover and cool temperatures kept conditions quite good all weekend. There was even running water in numerous creek locations. The WORCS crew added in a technical single-track canyon—known as the David…

Read More

2023 NGPC round 6 – Primm

By Precision Concepts | May 1, 2023 |

2023 Primm NGPC Report —  Shamrocks MC presented the sixth round of the 2023 AMA National Grand Prix Series in Primm, NV. Hot and dry conditions greeted the riders, with a long, high-speed circuit winding through the Nevada desert. With dust playing a factor, early track position would be important, as the field would quickly…

Read More

2023 WORCS round 4 — Blythe, CA

By Precision Concepts | April 10, 2023 |

2023 Blythe WORCS Report —  The fourth round of the WORCS series rolled into Blythe, CA where the first real heat of the season greeted the riders. Temperatures would eclipse 90 degrees on race day. Coupled with a physically demanding, seven-minute-long sand track, Sunday’s two-hour pro race would be a challenging affair. Tyler Lynn –…

Read More

2023 NGPC Round 5 – 29 Palms

By Precision Concepts | April 3, 2023 |

2023 29 Palms NGPC Report —  The 2023 29 Palms NGPC was a fast and furious affair. Though the hosting Hilltoppers MC eliminated the fastest section of course, a near-mile-long asphalt straightaway, for this season’s edition, there were still plenty of fourth- and fifth-gear sections for riders to carry some serious speed. There was one…

Read More

2023 WORCS round 3 — Lake Havasu

By Precision Concepts | March 13, 2023 |

2023 Havasu WORCS Report —  Warm temperatures and plentiful sunshine greeted the riders at the third round of the 2023 WORCS series in Lake Havasu City, AZ. Though it wasn’t overly hot conditions, the first warm weather of the year, combined with traditionally brutal terrain, meant it was going to be a physical challenge for…

Read More

2023 NGPC round 4 — Glen Helen

By Precision Concepts | March 6, 2023 |

2023 Glen Helen NGPC Report —  The 2023 AMA National Grand Prix Championship rolled into Glen Helen Raceway for the fourth round of the series. Recent rains (and more than a little snow) had everyone expecting epic conditions. In response to the wether, the hosting Prairie Dogs MC routed the racecourse almost entirely in the…

Read More

2023 NGPC round 3 – Blythe

By Precision Concepts | February 20, 2023 |

2023 Blythe NGPC Report —  The deep sand of Shorty’s MX park in Blythe, CA hosted the third round of the AMA NGPC series. The terrain at Blythe was a departure from recent rounds, as the terrain was much more physical. Deep whoops and sharp, choppy bumps cover most of the course. So, momentum, commitment,…

Read More

2023 WORCS round 2 – Delano

By Precision Concepts | February 13, 2023 |

2023 Delano WORCS Report —  Delano was the site for the second round of the 2023 WORCS series. Mostly clear skies and cool temps made for good track conditions. The rolling-hill terrain of the American MX facility offered a racecourse with a very fast flow. The terrain got choppy, but not overly rough, which meant…

Read More