Call Us! (951) 697-8488

Video: 2017 Plymouth NHHA

plymouth nhha gopro cover photo

Watch: Justin Morgan 2017 Plymouth NHHA GoPro Watch Rocky Mountain ATV/MC, Precision Concepts rider Justin Morgan’s Plymouth NHHA GoPro footage from 2017. Justin got off to a mid-pack start, but worked his way through the pack, and through a few groups of cattle, to earn a fifth place finish on the day.   To view…

Read More

Video: 2017 Glen Helen WORCS

Precision Concepts 2017 glen helen worcs gopro

Watch: 2017 Glen Helen WORCS GoPro Footage   Justin Seeds GoPro Watch the GoPro edit from unclassified at the 2017 Glen Helen WORCS round on board with Justin Seeds. In the pro final, Justin was charging forward after a mid-pack start when he lost the rear end. That would be the first of four crashes…

Read More

2017 WORCS #9 | Glen Helen

precision concepts rider justin seeds at 2017 glen helen worcs

2017 Glen Helen WORCS Report (Riverside, CA) — The 2017 Glen Helen WORCS round was the last Grand Prix before the summer break. With that in mind, both Rocky Mountain ATV/MC, Precision Concepts riders were looking to tighten the points. Justin Seeds came into the weekend 17 points behind in second, while Robby Bell was…

Read More

2017 NHHA #6 | Plymouth

precision concepts rider justin morgan at 2017 plymouth nhha

2017 Plymouth NHHA Race Report (Riverside, CA) – Justin Morgan came away from the sixth round of the AMA National Hare and Hound championship with a solid fifth. He was fresh off a Baja 500 victory the week prior and looked to carry the momentum into the 2017 Plymouth NHHA. However, patience would prove to…

Read More

CRF450X Built For Speed – Dirt Bike Magazine

Photo of CRF450X built by Precision Concepts for Dirt Bike magazine

CRF450X Built For Speed The Dirt Bike magazine crew wanted to build a CRF450X built for speed. They wanted to take the bike to the longest point-to-point desert race in the States: Vegas to Reno. As they stated, “Building a bike for speed is not that difficult…making a bike that produces easy-to-ride horsepower and can…

Read More

Africa Twin – Dirt Bike Magazine

Africa Twin Dirt Bike Magazine feature with Precision Concepts suspension

Africa Twin Feature in Dirt Bike Magazine In the December issue of Dirt Bike magazine, the crew tested an Africa Twin, which was set up by Scott Wright at IMS. The goal of the project bike was to lean heavily toward use in the dirt. They wanted a bike that could handle “real off-road riding”. At…

Read More

2017 WORCS #8 | Cedar City

Riverside, CA – Rocky Mountain ATV/MC, Precision Concepts’ Justin Seeds overcame adversity early in the race to finish fourth. After running inside the top five early, Justin had a run-in with a tree that sent him to the ground. Not long after, a rock found its way into his chain guide, creating an odd rattling…

Read More

2017 NHHA #5 | Jericho

Riverside, CA – Rocky Mountain ATV/MC, Precision Concepts’ Justin Morgan had an eventful day at the Jericho NHHA. It started when a number of riders jumped the banner drop, leaving the line early. Once Justin got going, his lines up the bomb-run were already full of riders, forcing him onto a section he hadn’t planned.…

Read More

2017 BIG 6 #5 | Primm

Riverside, CA – The fifth round of the 2017 AMA BIG 6 Grand Prix championship turned into quite the dusty affair as high winds swept through  the Primm, NV desert. There was little moisture left on most of the course by the time the ninety minute pro race was scheduled to start, making visibility quite…

Read More

2017 NHHA #4 | Lucerne

Riverside, CA – Rocky Mountain ATV/MC, Precision Concepts’ Justin Morgan finished a solid fourth place at the fourth round of the 2017 AMA NHHA Championship. The Lucerne race course featured a traditional three-loop layout with increasing technicality. Justin didn’t get off to the greatest start, but a cross-wind cleared much of the dust ahead of him on the…

Read More